RCI-4L Instruction Manual
When the device is correctly positioned a green LED will flash in the RAMPI
and a window will pop-up in Rasoft Pro prompting the device to be named and
associated to a Room. Having done this go to the Device editor page select
the inputs as necessary and assign the associated actions. This will be a single
action such as selecting a scene. If a macro function is desired then select the
Macro radio button and a drop down menu of actions will appear (the actual
macro steps are defined under the Macro tab). Having input the required
actions click on the Data Transfer tab and click Upload to device. Rasoft will
issue a prompt to hold the RAMPI against (or near) the RCI-4L. When
transferring data a progress bar will appear in Rasoft Pro and a solid green LED
will appear on the RAMPI.
To confirm the RCI-4L has been correctly programmed activate the connected
switches. The RAMPI has an internal wireless receiver which will detect the
transmissions and display the transmissions in the bottom right hand corner of
Rasoft Pro.
For more detailed information on programming the RCI-4L refer to the set-up
guide from
www.rakocontrols.com/Support
or Help/Set-up within Rasoft Pro.
General
Rako thanks you for having purchased a Rako product and hopes that you are
pleased with your system. Should for any reason you need to contact us please
contact us via our website
www.rakocontrols.com
or by phoning our customer
help line on 01634 226666.