RAK WisNode-UART WIFI EVB, Quick Start Manual

Page: 8 / 15

WISNODE-UART WIFI EVB QUICK START GUIDE
Copyright © Shenzhen Rakwireless Technology Co., Ltd
ETDX170218 8
2.2
Transmission function test in STA mode
2.2.1 Configure RAK477 module to router in AP mode
This part mainly introduces the parameter setting and network configuration of RAK477 module on
WisNode-UART EVB by RAK IOT_V1.0 mobile phone
（
Android APP Download address https://www.pgyer.com/rakiot
）
;
1.Download and install RAK IOT_V1.0 APP,And power up WisNode-Uart EVB;
2.
Mobile phone search module AP hot and connected to confirm that the phone connected to the module hot
after the installation of the installation of the APP, according to the following steps to start the configuration
：
Step 1: mobile phone search module AP hot and connected to confirm the phone connected to the module
after the hot open the installed APP;
Step 2: this example is the RAK477 module as an example to demonstrate, so the module type select
"RAK477";
Step 3: click OK to complete the module selection;