Documentation Center
Figure 3: Accessing the gateway via Wi-Fi AP mode
WAN Port (Ethernet)
1. Connect the Ethernet cable to the gateway port marked ETH and the other end to your PC.
Figure 4: Accessing the gateway via Wi-Fi AP mode
2. The default IP is 169.254.X.X. The last two segments (X.X) are mapped from the last four bits of the MAC
address of your gateway. For example, the last four bits of the MAC address are 0F:01, and the IP address is
169.254.15.1
. Make sure to manually set the address of your PC to one in the same network (for example,
169.254.15.100
).
3. To do this, open the head to the Ethernet Properties and click the Internet Protocol Version 4 (TCP/IPv4).
