Documentation Center
Figure 11: Wrong way: Applying uneven forces to detach the header from the socket
3. The short-side of the connector can be pulled out asymmetrically, but apply the force vertically and avoid
rotating the header.
Figure 12: Wrong way: Do not rotate the header
4. Avoid applying forces in a single corner.
Figure 13: Wrong way: Do not apply force in a single corner of the header
Assembling a WisBlock Module
WisBlock Core
A WisBlock Core module is designed to be installed on the CPU slot of the RAK19001 Base Board. As shown in
Figure 14, the location is properly marked by silkscreen. Follow carefully the procedure defined in
attaching a
WisConnector
section in order to attach a Core module. Once attached, fix the module with one or more pieces of
M1.2 x 3 mm screws depending on the WisBlock Core.
