Documentation Center
Figure 4: Detaching silkscreen on the WisBlock module
3. Apply force to the module at the position of the connector, as shown in Figure 5, to detach the module from the
baseboard.
Figure 5: Applying even forces on the proper location of a WisBlock module
📝
NOTE
If you will connect other modules to the remaining WisBlock Base slots, check on the
Software Configuration and Example
In the following example, you will be using the
RAK13003 WisBlock IO Expansion Module
to power LEDs.
These are the quick links that go directly to the software guide for the specific WisBlock Core module you use:
RAK13003 in RAK4631 WisBlock Core Guide
RAK13003 in RAK11200 WisBlock Core Guide
RAK13003 in RAK11300 WisBlock Core Guide
RAK13003 in RAK4631 WisBlock Core Guide
Arduino Setup
Shown in Figure 6 is the illustration on how to use the RAK13003 IO Expansion Module to power ON LEDs using
digitalWrite function.