RAK RAK11200, Quick Start Manual, Page: 11 / 22

Documentation Center
IO6 <-> Arduino GPIO number 22
SW1 <-> Arduino GPIO number 34
A0 <-> Arduino GPIO number 36
A1 <-> Arduino GPIO number 39
SPI_CS <-> Arduino GPIO number 32
LED1 <-> Arduino GPIO number 12
LED2 <-> Arduino GPIO number 2
Defined names from variant.h
Software Setup
Getting started with RAK11200 is simple and straightforward. The first thing you need is to set up your software
development environment. We have made detailed tutorials on how to set up Arduino™ IDE and the PlatformIO
extension to be ready to use the WisBlock 11200.
Arduino IDE BSP Installation
Install RAKWireless ESP32 BSP on Arduino Boards
Manager
1. To add board support for RAK11200 on Arduino, start Arduino IDE and open the Preferences window (File >
Preferences).
Figure 2: Arduino File Preferences Window
# define WB_IO1 14
# define WB_IO2 27
# define WB_IO3 26
# define WB_IO4 23
# define WB_IO5 13
# define WB_IO6 22
# define WB_SW1 34
# define WB_A0 36
# define WB_A1 39
# define WB_CS 32
# define WB_LED1 12
# define WB_LED2 2