2
www.macdonaldindustries.co.nz
NOTES
• Inspect all items thoroughly immediately on receipt to ensure it meets
your requirements.
• Inspect product for defects prior to installation. MacDonald Industries will
not be responsible for any claims related to replacements after a product has
been installed.
• Ensure wall support bracket has been installed to the correct height as required
to meet the contract specification and NZ Building Code G1.
• Check water pressure does not exceed 500kPa. Fit pressure reducing valve
if necessary.
• Check water inlet / waste outlet positions are correct for the WC supplied
according to the measurements in Dia. 1.
• All measurements provided are based on finished wall/floor.
• Installation must only be completed by a registered plumber in accordance with
AS/NZS3500 requirements.
• Correct wall support for any wall hung WC is essential and is totally the
responsibility of the contractor. MacDonald Industries will not accept any claim
for damages caused by inadequate wall structures, materials or incorrect
support for the WC.
Dia 1
337
440
15
0
340
400
180
13
5
10
0
30
65
315
525