Chapter 5. Using BCAdmin™
The bottom portion of the Info Area contains three tabs, each of which contains a list of connections (if
any). The BreadCrumbs tab shows connections to other BreadCrumb devices, the Clients tab shows
connections with client devices, and the Pending Peers tab shows connections with other BreadCrumb
devices that have not yet reported to BCAdmin (e.g., have just been turned on and are not yet fully
booted, or are only reachable via an extremely poor link).
The same information is available in each list. The following figure shows an example listing of
BreadCrumb connections.
Figure 5-7. Link Detail Tabs
Tip: Hover your mouse over the connection detail in the Info Area to highlight the corresponding line in the
Topology Area.
Configuring Individual BreadCrumbs
To configure a specific BreadCrumb device, right-click on the BreadCrumb device in the Topology Area
and choose
Properties...
. A window will appear via which the BreadCrumb device can be
27
