www.raisecom.com
User Manual
15
Chapter 5
Basic Connection and Typical Application
5.1 Basic Connection
5.1.1 Connect the optical interface
Insert the well-prepared fiber patch cord into the optical interface on the front panel of the device.
For device adopting optical transceivers M, S1, S2 or S3, the optical interface connection pattern is
shown in Figure 5-1. On the device panel, “TX” indicates output optical signal, while “RX” indicates
input optical signal.
Figure 5-1 The connection of the optical interface - 1
For device adopting optical transceiver SS13, SS15, SS23 or SS25, the optical interface connection
manner is shown in Figure 5-2. In this circumstance, the optical interface will receive as well as
transmit signals. “TX” and “RX” on the device panel have no meaning. For details, please refer to
the ordering information in section 1.3.
Figure 5-2 The connection of the optical interface – 2