background image

                                                          

Raisecom Technology Co., Ltd 

2. Overview 

2.1. Introduction   

RC800-60B series optical modular optical multiplexers are ideal equipments to transmit 
dual-channel E1 signals over optical fiber. It can be inserted into Raisecom’s chassis which 
can also accommodate other Raisecom series products to enable uniform network 
management. RC800-60B series are compact in size and highly integrated with versatile 
capabilities. RC800-60B also can be inserted into Raisecom’s single slot chassis to be 
flexibly deployed at the remote site.   
 
The RC800-60B series optical multiplexers are ideal for point-to-point, medium-sized and 
small capacity networks, such as wireless communication base stations, dedicated 
communication networks and switching networks. The transmission capacity of RC800-60B 
series is dual-channel E1 (equivalent to 60 voice channels).   

2.2. Main Features 

z

  RC800-60B series optical multiplexers adopt very large scale ASIC chips with low 

power consumption. Four-level PCB circuit board ensures high reliability. 

z

  RC800-60B provides complete alarm indications. The local and remote alarms can be 

displayed simultaneously.   

z

  RC800-60B supports loop-back function for E1 channel. It is convenient for deployment, 

operation and maintenance. 

z

  RC800-60B is also featured by modularization design with high security, stability, 

reliability, and easy to use. Power supply is provided from the chassis backplane.   

2.3. Product Article Description 

Article

 

Description

 

RC802-60B -S1 

Module at central office/customer premise, DB9 interfaces for 2 E1 channel; 
optical port, dual-fiber single mode (DSC), 0-25Km 

RC802-60B -S2 

Module at central office/customer premise, premise, DB9 interfaces for 2 E1 
channel; optical port, dual-fiber single mode(DSC), 10-60Km 

RC802-60B -S3 

Module at central office/customer premise, premise, DB9 interfaces for 2 E1 
channel; optical port, dual-fiber single mode(DSC), 15-120Km 

RC804-60B -S1 

Central office module, premise, DB9 interfaces for 2 E1 channel; optical port, 
single fiber single mode 1310 (SC-PC), dual-wavelength, 0-25Km 

RC804-60B -S2 

Central office module, premise, DB9 interfaces for 2 E1 channel; optical port, 
single fiber single mode 1310(SC-APC), dual-wavelength, 10-50Km 

RC806-60B -S1 

Customer premises module, premise, DB9 interfaces for 2 E1 channel; one 
optical port, single fiber single mode 1550 (SC-PC), dual-wavelength, 
0-25Km 

RC806-60B -S2 

Customer premises module, premise, DB9 interfaces for 2 E1 channel; one 
optical port, single fiber single mode 1550 (SC-APC), dual-wavelength, 
10-60Km 

Summary of Contents for RC802-60B Series














Reviews: