2. Parameters
2.1. V.35 Interface Specification
Physical characteristics:
Complies with V.35 interface standard of ITU
Connector type:
HDB26 Female, transfer to ISO 2593 female connector by
accessory cable CBL-V35-HDB26M/M34F
Working mode
：
DCE (support cross connection with other DCE device)
Interface bit rate
：
V.35 interface bit rate is N×64Kbps
（
N=1~31
）
at E1 fractional
mode
V.35 interface bit rate is 2048Kbps at E1 transparent mode
2.2. Optical Fiber Interface Specification
Bit
rate:
100Mbps
Line
code:
4B5B
Fiber connecter:
SC (FC available for some dual-fiber types)
Product number
Transmit
Wavelength
(Nm )
Laser
type
Receiver
type
Launch
power
(dBmW)
Over
load
point
(dBm)
Receiving
sensitivity
(dBmW )
Typical
transmission
distance
(Km)
RC802-30B-FV35-S1
1310
FP
PIN
-15,-8
>-8
<-34
0-25
RC802-30B-FV35-S2
1310
FP
PIN
-5,0
>-8
<-34
10-60
RC802-30B-FV35-S3
1550
DFB
PIN
-5,0
>-10
<-36
15-120
RC804-30B-FV35-S1
1310
FP
PIN
-12,-3
>-8
<-30
0-25
RC806-30B-FV35-S1
1550
DFB
PIN
-12,-3
>-8
<-30
0-25
RC804-30B-FV35-S2
1310
FP
PIN
-5,0
>-8
<-32
10-50
RC806-30B-FV35-S2
1550
DFB
PIN
-5,0
>-8
<-32
10-50
2.3. Cable type
When connect this series product with DTE equipments such as routers through HDB26
interface, please use CBL-V35-HDB26M/M34F cable provided by Raisecom (standard
accessory) to work with DTE/routers cable. When the CBL-V35-HDB26M/M34F cable is not
long enough, please order it from Raisecom.
When connect this series product with other venders DTE equipments, the cross cable
CBL-V35-HDB26M/M34M-X is necessary, and please order it from Raisecom (non
standard accessory). The default length of this cable is 2m.
2.4. Power Consumption
Power consumption of whole device:
≤
5W
