Raisecom iTN200-PWE3-8E1-BL, Hardware Description

Page: 27 / 84

Raisecom
iTN201-R (C) Hardware Description
2 MCC
Raisecom Proprietary and Confidential
Copyright © Raisecom Technology Co., Ltd.
13
Table 2-3 Technical specifications of iTN201-4GF-R
Parameter Description
Dimensions (mm) 259.3 (Width) × 243.4 (Depth) × 19.8 (Height)
Weight (kg) 0.8
Power consumption (W) 37
2.2 iTN201-2XG-R
2.2.1 Functions
The iTN201-2XG-R is the main service access and processing unit of the iTN201-R. It
realizes up to 12 ways of Ethernet services and accesses and processes 2 ways of 10 GE
services in uplink. The iTN201-2XG-R is inserted into the slot for the MCC.
The iTN201-2XG-R provides the following features:

Provide 2 uplink 10 Gbit/s Ethernet optical interfacesand 6/12 downlink 1000 Mbit/s
Ethernet optical interfaces (using TSFP); Support loopback interface.

Provide a RJ45 out-of-band SNMP interface.

Provide a Universal Serial Bus (USB) Console interface, complying with the USB 2.0
standard.

Support Digital Diagnostics Monitoring (DDM) of the Small Form-factor Pluggable
(SFP) and Two-channel compact Small Form-factor Pluggable (TSFP) modules.

Support hot swapping between the MCC and the backplane/subcard.

Support interface configuration and status inquiry.

Support IEEE 802.1Q Virtual Local Area Network (VLAN).

Support mapping between basic QinQ and VLAN.

Support global 32×1024 Medium Access Control (MAC) addresses, including 200 static
MAC addresses.

Support MPLS L2VPN and L3VPN.

Support Layer 3 IP services such as Address Resolution Protocol (ARP) and Dynamic
Host Configuration Protocol (DHCP).

Support Intermediate System to Intermediate System (ISIS), Open Shortest Path Frist
(OSPF), and Border Gateway Protocol (BGP).

Support Layer 2 and Layer 3 Quality of Service (QoS), including priority trust and
mapping, traffic classification, traffic policy, congestion avoidance, queue shaping,
MPLS QoS, L3 VPN QoS, and so on.

Support access Control List (ACL).

Support basic functions, such as storm control, port mirroring, and link aggregation.

Support 802.3ah Operation, Administration and Maintenance (OAM), Connectivity Fault
Management (CFM), Service Level Agreement (SLA), MPLS-TP OAM, and
Bidirectional Forwarding Detection (BFD).

Support G.8031 Ethernet Linear Protection Switching (ELPS), G.8032 Ethernet Ring
Protection Switching (ERPS), G.8131 MPLS-TP linear protection switching, PW
redundancy protection, and Virtual Router Redundancy Protocol (VRRP).