Raisecom ISCOM6800 Hardware Description Download Page 46

Page: 46 / 84

Raisecom
ISCOM6800 (A)Hardware Description

3 Cards

Raisecom Proprietary and Confidential

LED

Quantity

Status

Description

LNK/ACT
1/2/3/4

Green

SFP interface working LED



Green: the link is connected properly and there is
no data being transmitted.



Blinking green: the link is connected properly and
there is data being transmitted.



Off: the link is disconnected or is connected
improperly.

3.10.5 Technical specifications

Table 3-42 lists technical specifications of the XP4L card.

Table 3-42

Technical specifications of the XP4L card

Parameter

Description

Dimensions

392 mm (Width) × 222 mm (Depth) × 22.5 mm (Height)

Weight

0.82 kg

Maximum power consumption 35 W

3.11 Multi-function environment monitoring card (CICA)

3.11.1 Functions

The CICA card is a multi-function sub-card of the ISCOM6800, mainly used for
inputting/outputting external environment monitoring values and MCC interface expansion.

Table 3-43 lists functions of the CICA card.

Table 3-43

Functions of the CICA card

Function

Description

Basic functions



Collect switching signals.



Support remote upgrade.

Interface specification

2 RJ45 interfaces

3.11.2 Panel and slots

The CICA card can be inserted into the following slots of the ISCOM6800 chassis:



Slot 21



Slot 22

Summary of Contents for ISCOM6800





















































































Search results

Summary of Contents for ISCOM6800

Reviews:

Brands by name

Popular brands

Raisecom ISCOM6800, Hardware Description

Search results

Summary of Contents for ISCOM6800

Reviews:

Brands by name

Popular brands