Raisecom ISCOM6800 Hardware Description Download Page 37

Page: 37 / 84

Raisecom
ISCOM6800 (A)Hardware Description

3 Cards

Raisecom Proprietary and Confidential

3.6.4 LEDs

There are 9 LEDs on the XEP8 card.

Table 3-25 lists LEDS on the XEP8 card.

Table 3-25

LEDs on the XEP8 card

LED

Quantity Status

Description

SYS/ALM

Green

System working status LED



Fast blinking green (4 Hz): the system is being
initialized.



Slow blinking green (1 Hz): the system is
working properly.



Off/Green: the system is working improperly.

Red

Alarm LED



Red: a fault is generated.



Blinking red: the card is inserted improperly.



Off: no fault is generated.

Orange Standby LED



Orange: the card is in standby status.



Off: the card is not in standby status.

When the card is in standby status, other
LEDs are off.

LNK1–LNK8

Green

PON interface working LED



Green: the interface is properly connected and
a successfully-registered ONU is working on
the interface.



Off: the interface is disconnected or no ONU is
successfully registered

3.6.5 Technical specifications

Table 3-26 lists technical specifications of the XEP8 card.

Table 3-26

Technical specifications of the XEP8 card

Parameter

Description

Dimensions

392 mm (Width) × 222 mm (Depth) × 22.5 mm (Height)

Weight

1.02 kg

Maximum power consumption 88.5 W

Summary of Contents for ISCOM6800





















































































Search results

Summary of Contents for ISCOM6800

Reviews:

Brands by name

Popular brands

Raisecom ISCOM6800, Hardware Description

Search results

Summary of Contents for ISCOM6800

Reviews:

Brands by name

Popular brands