Raisecom ISCOM5508 Hardware Description Download Page 28

Page: 28 / 58

Raisecom
ISCOM5508 (B) Hardware Description

2 Components

Raisecom Technology Co., Ltd.

2.6.2 Panel and slots

The RPD1101 power module can be inserted into slot 4 or slot 5.

Figure 2-11 shows the panel of the RPD1101 power module.

Figure 2-11

Panel of the RPD1101 power module

2.6.3 Interfaces

There is 1 interface on the RPD1101 power module.

Table 2-19 lists the interface on the RPD1101 power module.

Table 2-19

Interface on the RPD1101 power module

Interface

Usage

BGND power input

−

-48 V power input

Grounding

2.6.4 LEDs

There are 3 LEDs on the RPD1101 power module.

Table 2-20 lists LEDs on the RPD1101 power module.

Table 2-20

LEDs on the RPD1101 power module

LED

Status

Description

PWR

Green

Power LED



Green: the power supply is working properly.



Off: the power supply is working improperly.

Green

Power input LED



Green: the input power is working properly.



Off: the device is powered off or powered on improperly.

Summary of Contents for ISCOM5508



























































Search results

Summary of Contents for ISCOM5508

Reviews:

Related manuals for ISCOM5508

Brands by name

Popular brands

Raisecom ISCOM5508, Hardware Description

Search results

Summary of Contents for ISCOM5508

Reviews:

Related manuals for ISCOM5508

Brands by name

Popular brands