Raisecom
Gazelle S1512i-PWR (A) User Manual
4
Cables
Raisecom Proprietary and Confidential
Copyright © Raisecom Technology Co., Ltd.
27
4.4 Fiber
4.4.1 Introduction
The Gazelle S1512i-PWR supports the Single-Mode Fiber (SMF) and Multi-Mode Fiber
(MMF). These two kinds of fiber are same in appearance while different in color. The yellow
one is the SMF and the orange one is the MMF.
The Gazelle S1512i-PWR can be connected to the Optical Distribution Frame (ODF) or
optical interfaces of other devices through the fiber.
Table 4-6 lists the type and usage of the fiber.
Table 4-6
Type and usage of the fiber
Usage
Local
connector
Remote
connector
Type
Standard
Connect the Gazelle
S1512i-PWR to the
ODF through the
Ethernet optical
interface.
Connect the Ethernet
optical interface on the
Gazelle S1512i-PWR to
optical interfaces on
other devices.
LC/PC
LC/PC
2-mm SMF
ITU-T
G.652
2-mm MMF
LC/PC
FC/PC
2-mm SMF
2-mm MMF
LC/PC
SC/PC
2-mm SMF
2-mm MMF
Choose the connector type and jumper cable length reasonably based on the on-
site requirements.
Choose a connector suitable for the optical interface. Otherwise, it may increase
additional loss of fiber links, reduce transmission quality of services, or even
damage the connector and optical interface.
4.4.2 Appearance
Figure 4-8 shows the appearance of the LC/PC fiber connector.
