Raisecom Gazelle S1503i User Manual Download Page 40

Page: 40 / 74

Raisecom
Gazelle S1503i (A) User Manual

Technical specifications

Raisecom Technology Co., Ltd.

Item

Parameter

Frequency

50/60 Hz

–

Overload protection

Supported

Reverse connection protection

Supported

3.2 EMC standards

The Gazelle S1503i is compliant with the following Electromagnetic Compatibility (EMC)
standards:



Electro Magnetic Interference (EMI) meets CISPR 22 CLASS A related requirements.



Static electricity meets IEC 61000-4-2 level 3 requirements.



Radiated Immunity Test (RIT) meets IEC 61000-4-3 level 3 requirements.



Electrical Fast Transient (EFT) meets IEC 61000-4-4 level 3 requirements.



Damped oscillation meets IEC 61000-4-12 level 3 requirements.



Surge (impact) meets IEC 61000-4-5 level 4 requirements.



Power Frequency Magnetic Field meets IEC 61000-4-8 level 3 requirements.



Pulse Magnetic Field meets IEC 61000-4-9 level 3 requirements.



Damped Oscillation Magnetic Field meets IEC 61000-4-10 level 3 requirements.



Conducted Immunity (CI) meets IEC 61000-4-6 level 3 requirements.



DC power sag or temporary interruption immunity meets IEC 61000-4-29 requirements.



AC power voltage falling and interruption meet IEC 61000-4-11 requirements.

3.3 Environmental standards

The Gazelle S1503i is applicable to the industrial environment and environmental
requirements are as shown in Table 3-2.

Table 3-2

Environmental requirements of the Gazelle S1503i

Item

Range

Air pressure

86–106 kPa

Operating temperature

-40 to 75°C

Storage temperature

-40 to 85°C

Operating humidity

5%–95% RH (non-condensing)

Protection level

IP40

Environmental authentication

Comply with EU RoHS standard.

Summary of Contents for Gazelle S1503i











































































Search results

Summary of Contents for Gazelle S1503i

Reviews:

Related manuals for Gazelle S1503i

Brands by name

Popular brands

Raisecom Gazelle S1503i, User Manual

Search results

Summary of Contents for Gazelle S1503i

Reviews:

Related manuals for Gazelle S1503i

Brands by name

Popular brands