Raisecom Gazelle S1020i-LI User Manual Download Page 44

Page: 44 / 71

Raisecom
Gazelle S1020i-LI (A) User Manual

3 Technical specifications

Raisecom Proprietary and Confidential

Table 3-1

Reliability indicators

Parameter

Requirements

System availability

99.999%. The annual failure time for the Gazelle
S1020i-LI should be no longer than 5 minutes.

Annually system mean repair rate

< 1.5%

MTTR

< 2 hours

3.1.4 Safety standards

The Gazelle S1020i-LI meets UL60950 requirements.

3.1.5 EMC standards

The Gazelle S1020i-LI is compliant with the following Electromagnetic Compatibility (EMC)
standards:



Electro Magnetic Interference (EMI) meets CISPR 32 CLASS A requirements.



Static electricity meets IEC 61000-4-2 level 4 requirements.



Radiated Immunity Test (RIT) meets IEC 61000-4-3 level 3 requirements.



Electrical Fast Transient (EFT) meets IEC 61000-4-4 level 4 requirements.



Damped oscillatory wave meets IEC 61000-4-18 level 3 requirements.



Surge (impact) meets IEC 61000-4-5 level 4 requirements.



Power frequency magnetic field meets IEC 61000-4-8 level 4 requirements.



The pulse magnetic field meets IEC 61000-4-9 level 5 requirements.



Damped oscillatory magnetic field meets IEC 61000-4-10 level 4 requirements.



Conducted Immunity (CI) meets IEC 61000-4-6 level 3 requirements.



AC voltage dips and short interruptions immunity meets IEC 61000-4-11 requirements.



DC voltage dips and short interruptions immunity meets IEC 61000-4-29 requirements.

3.1.6 Environmental standards

The Gazelle S1020i-LI is applicable to the industrial environment with environmental
requirements shown in Table 3-2.

Table 3-2

Environmental requirements

Parameter

Description

Air pressure

86–106 kPa

Operating temperature (altitude: 0–1800 m)

-40 to 75°C

Storage temperature

-40 to +85°C

Operating humidity

5%–95% RH (non-condensing)

Protection class

IP40

Summary of Contents for Gazelle S1020i-LI








































































Search results

Summary of Contents for Gazelle S1020i-LI

Reviews:

Related manuals for Gazelle S1020i-LI

Brands by name

Popular brands

Raisecom Gazelle S1020i-LI, User Manual

Search results

Summary of Contents for Gazelle S1020i-LI

Reviews:

Related manuals for Gazelle S1020i-LI

Brands by name

Popular brands