RAIS RONDO 92, User Manual

Page: 14 / 32

ENGLISH RAIS ­ manual for Rais Rondo 92 & Rondo 120
Installation distance to combustible wall
To find out whether the wall next to where the stove is going to be installed is flammable,
you should contact your building contractor or the local building authorities.
The hearth should be able to accommodate the weight of the stove. The chimney must
be independently supported by wall brackets or a ceiling support plate. The weight of the
stove is indicated in the brochure.
The stove should always be installed on a non­combustible hearth of a size and
construction that is in accordance with the provisions of the current UK Building
Regulations Approved Document J.
If the stove is to be installed on a wooden floor, it must be covered with a
non­combustible material at least 12mm thick, in accordance with UK Building
Regulations Approved Document J, to a distance of 300 mm in front of the stove and
150 mm to each side measuring from the door of the combustion chamber.
The clearance distances to combustible material beneath, surrounding or upon the
hearth and walls adjacent to the hearth should comply with the guidance on the
separation of combustible material given in UK Building Regulations Approved
Document J and also in these stove instructions.
Inform the user that the appliance has been commissioned and ready to use and give
instruction on the safe operation of the stove.
These Instructions must be left with the user and the user should be instructed to keep
them in a safe place.