5
Assembly Instructions
The detailed dimensions of the RAIS 60 Insert are as shown:
Although the RAIS 60 Insert comes assembled,
it has to be mounted into the fireplace or firebox.
1. First remove the baffle plate by lifting it up on
2. its side towards the top, and then pulling it out
3. the front (refer to “Cleaning the Smoke Box/Baffle System”).
Included is a RAIS flue collar with a 45° elbow,
which enables connection to the chimney or liner.
4. In some cases an offset box may also be needed for adjusting
the position of the insert (as shown in the diagram). Attach the flue collar/offset box to
the chimney/liner.
5. The insert (firebox) can then be placed and centered in the fireplace or built-in opening.
To level the insert, use the 4 leveling screws situated at the bottom of the firebox (the
stones will need to be removed to make the adjustments). Important! At least ½” (1cm)
space should be left between insert and the opening.
6. Now the stovepipe (flexible or solid) can be attached to the offset box/collar on the
insert. Reach up through the insert and pull the flue collar into the opening. Securely
attach by bending the tabs on the collar over the insert’s flange.
