15
Place the right cross log next. Use the recessed
area at the front right corner of the burner top that
corresponds to the shape of the base of the cross
log. Place the charred end of the log in the recess
and guide the alignment pin hole in the underside
of the log onto the rear alignment pin in the arch
log.
The adjacent illustration shows the proper positions
for the first two logs.
ASSEMBLY
LOGS AND EMBERS
Carefully unpack each of the three logs and the em-
ber chunk from the log and accessory box. The logs
and ember chunk are somewhat fragile and will not
survive being dropped from any significant height.
If you haven’t already done so, remove any protec-
tive cover material from the top of the burner.
Each of the three logs is unique and must be placed
in a precise location on top of the burner. The burner
and log system is designed to facilitate correct place-
ment of the logs. Flat recessed areas on the burner
top are keyed to each of the main logs. See the adja-
cent illustration.
Place the arched log first. There is recessed area in
the left front corner of the burner top as well as right
rear corner. The charred area on the log faces the
front of the stove. When correctly positioned, the
log will sit firmly in place without tipping or rock-
ing.
The arched log has two sockets for the ceramic pins
that are included with the log set. These pins locate
the left and right cross logs. Place the pins in the
sockets. Refer to the illustration below.
