RAIS Epoca II, User Manual

Page: 35 / 190

35
English RAIS - Manual for RAIS Poleo II, RAIS Epoca II
Installation
The stove can be free standing on the floor or hung on a non-combustible wall. In addi-
tion, it may be built into a wall (see specifications).
When installing the wood burning stove, there are some rules which MUST be followed:
The stove must be set up and installed in accordance with all current national and local
rules and reulations. Local authorities and a chimney specialist should be contacted prior
to set up.
It is prohibited to carry out unauthorised alterations to the stove.
There must be plenty of fresh air in the room where the stove is being installed, in order
to ensure proper combustion. Note that any mechanical exhaust ventilation - e.g. an
extraction hood - may reduce the air supply. Any air grates must be placed in such a man-
ner, that the air supply is not blocked.
The floor structure must be able to carry the weight of the wood burning stove, as well as
the weight of a chimney, if necessary.
The stove is placed on fireproof material (for the freestanding model).
As for the wall-mounted version, the wall must be non-combustible, and must support
the weight of the oven as well as a possible chimney. The wall bracket (accessory) is fitted
with suitable bolts
When you choose where to set up your RAIS wood burning stove, you should consider
the heat distribution to the other rooms. This will enable you to get the best use out of
your stove.
The stove should be set up at a safe distance from inflammable materials.
See the manufacturer’s plate on the wood burning stove.
Upon receiving the stove must be inspected for defects.
NOTE!!
RAIS A/S recommends that the stove is installed by a qualified/
competent Rais dealer or a fireplace fitter recommended by an
authorized RAIS dealer.
See www.rais.com for dealer list.