RAIS/attika VISIO 1, User Manual

Page: 190 / 415

54
VISIO 2 (uden afdækning)
Panel indbygning
air tilslutning
English RAIS/
attika
- User manual for VISIO
Air-system
When mounting the Air system ensure that the air control system provides fresh air
from the outside.
In order for the Air system to function, you have to ensure in the structure that no
vacuum occurs in the housing.
If convection grates are installed, be sure not to block them.
Air system (accessory) is connected to the bottom of the stove.
150 mm metal
flex tube
For the Installer
Finally before firing the stove for the first time a check should be made to ensure that
the assembly and stove installation has been satisfactory and that there are no leaks in
any seals in the appliance and appliance connections to the chimney.
Ensure that the appliance and chimney flue are functioning correctly before finally
handing over to the user. If necessary read the later parts of this manual for guidance
on care required when first lighting.
Inform the user that the appliance has been commissioned and ready to use and give
instruction on the safe operation of the stove.
These Instructions must be left with the user and the user should be instructed to keep
them in a safe place.