Digital Timer Quick Installation Guide
Note before installation
Do not use tools for installation
Clean the water inlet filter regularly
Please place the timer indoors in advance
to prevent frost in anticipation of freezing
weather.
For outdoor use with cold water only
1 .
Check the water inlet filter
Congratulations, you have completed the installation of the timer, now please
see the instructions to start programming your watering schedule.
3 .
Mount the timer on a 3/4" garden faucet
4 .
Activate the valve in the timer
Warning
Water inlet should be higher than all
water outlets
5 .
Pre-use inspection/troubleshooting
Turn on the faucet and repeat the Step 4
Check: ① Whether the water flows out or shut off when the valve is opened or closed.
② Is there water leakage at the water inlet.
The display is as vertical as possible to
the ground to prevent rainwater from
accumulating and leaking into the
interior
Tips
: In order to extend the service life, we recommend that the
product display is not exposed to the sun and heavy rain.
If you have a timer with 2 outlets, please activate
the valves for each of the 2 outlets.
If you have any questions, please contact the U.S. service hotline at
1-833-3815659
or email to
2 .
Correctly load the new alkaline dry batteries, cover tightly the
battery compartment
cover / tray
Turn the dial to ON, press and hold the OK button
to manually turn the valve on or off for 3-5 times.
