6
7
SPRAYING
1. To turn on the sprayer simply choose one
of two flow rate settings. “I” for low or
“II” for high. When sprayer is in the
“O” position the sprayer is off. (See Figure 6)
2. Check bottom indicator light. Green light
indicates a charged battery. Red light
indicates battery needs charging.
Helpful Hint: Having a spare battery allows
you to limit down time. When one sprayer is in use, the other can
be charging.
3. Point nozzle in safe direction away from people and animals, and
never spray against adverse wind.
4. Press down on the switch assembly on the handle to begin.
5. Move at a constant speed and direction to avoid over spraying
and/or missing your coverage area.
CLEANING AND MAINTENANCE
CAUTION
- DO NOT perform procedures that are not in this manual.
1. Before use, inspect the overall condition of the sprayer. Look for
signs of damaged parts, loose parts, dirt, debris or any other signs
that would affect safe operation.
DO NOT USE DAMAGED EQUIPMENT
2. After use, clean the external surface of the sprayer with a clean,
damp cloth.
3. Flush interior and clean the exterior of the sprayer.
4. Ensure the sprayer wand is cleaned and maintained to avoid clog-
ging or build up.
Figure 6
OPERATION
Before operating sprayer make sure you use approved eye protection,
gloves, masks, clothing and any other necessary safety equipment.
1. Ensure battery has been fully charged prior to first use. Open bat-
tery compartment on the sprayer and slide the battery pack on to
the socket. Close cover.
2. It is recommended to test the sprayer, using clean water, for leaks
in any of the connections prior to adding any solution mix to your
sprayer.
3. The Rainmaker
®
Sprayer includes 3 sprayer nozzles. Choose the
spray nozzle which best suits your needs. See page 10 for spray
patterns.
a. Adjustable conical spray nozzle attachment
b. Fan style spray nozzle attachment
c. 3 nozzle misting attachment
4. To change spray head, pull down on the
female quick connect coupler and insert
desired sprayer head into the quick connect.
Check the spray nozzle connection is secure.
(See figure 5) It is recommended to run clean
water through the sprayer to test for leaks prior
to adding any solutions.
FILLING YOUR TANK
Unscrew cap. Ensure filter is free from dirt and debris prior to filling.
DO NOT overfill tank. Screw cap on securely.
Figure 5
