PARTS
BH010-1 BH010-020 Head
BH010-2 BH010 Sump (10”)
BH020-2 BH020 Sump (20”)
BH010-3 BH010/020 O-Rings
BH010-5 Wrench
SEDIMENT CARTRIDGES AVAILABLE
BC101
10” 1 micron Sed. Cartridge for BH010
BC1
10” 5 micron Sed. Cartridge for BH010
BC3
10” 25 micron Sed. Cartridge for BH010
BC201
20” 1 micron Sed. Cartridge for BH020
BC205
20” 5 micron Sed. Cartridge for BH020
BC225
20” 25 micron Sed. Cartridge for BH020
CARBON CARTRIDGES AVAILABLE (Chlorine, Taste & Odour)
BC2
10” 5 micron Carbon Cartridge for BH010 rated flow 3 US gpm (not for whole-house use)
BC202
20” 5 micron Carbon Cartridge for BH020 rated flow 6 US gpm (not for whole-house use)
Note: A sediment filter must be installed before the carbon cartridges to prevent premature plugging up of the cartridges due to dirt,
sediment etc.
Optional Parts
BH010/020 Mounting Bracket and Bolts - BH010-6
f)
Remove plastic wrap from filter cartridge (not included) and place it in sump, making sure it is centered. Screw on the sump onto the head
by turning counterclockwise to tighten. Hand tighten only.
DO NOT USE WRENCH AND OVERTIGHTEN.
g)
Open valves before and after the filter unit, slowly turn on water supply and check for leaks. Flush water for 10 minutes prior to use.
YOUR UNIT IS
NOW IN OPERATION
CHANGING YOUR CARTRIDGE
You should change your cartridge when the water flow is noticeably reduced or every 4-6 months, whichever is earlier.
To replace cartridge, shut off the
inlet valve and open a faucet closeby until pressure in the unit is relieved.
Using the supplied wrench, unscrew the sump. Discrad old cartridge and rinse sump. Insert new cartridge intp the sump and scre on sump back on to filter.
Handtighten only. DO NOT USE WRENCH TO TIGHTEN SUMP. Slowly open the water and flush for a few minutes before use.
MAINTENANCE
Lubricate both o-rings on the top of the sump periodically to prolong their life. Use food grade silicone lubricant or other non-petroleum based lubricants
only. Wash the filter sump with mild soap and water.
DO NOT
use harsh cleaners or hot water. If your unit is not used in winter, or will be subject to freez-
ing temperatures, drain unit and remove cartridges.
BH010-1
BH010-3
BH010-2
BH020-2
(not shown)
PARTS LIST AND CARTRIDGE OPTIONS
BH010-5
Thank you
for purchasing one of our ENVIROGARD / Rainfresh Water Filters. We are committed to ensuring that you are
totally
satisfied
. If you have any problems, don't go back to the store -
please contact us !
Most issues can be resolved over the phone. (Monday to Friday - 8:00 a.m. to 5:00 p.m. EST)
Help Line: 1-800-667-8072 Toronto & Area: 905-884-9388 Website: www.rainfresh.ca
LIMITED WARRANTY
Envirogard system housings are warranted, to the original Consumer purchaser/owner, for a period of one (1) year, from the date of purchase, against defects in materials or workmanship.
Envirogard’s obligation under this warranty shall consist of repair, replacement or credit, at its option, of any part found by Company inspection to be defective, provided that the product
has not been misused, abused, altered or damaged as determined by the Company and provided that only approved Envirogard/Rainfresh replacement cartridges and seals have been used
in the housing. This warranty does NOT apply to the replacement cartridge which by nature will diminish in performance through normal use and requires regular replacement. This war-
ranty does NOT cover, and is intended to exclude, any liability on the part of Envirogard for any incidental damages, consequential damages, labour charges or any other costs incurred in
connection with the purchase, installation, use, maintenance or repair of the water filter whether under this warranty or any other warranty implied by law. Some provinces/states do not
allow the exclusion of incidental or consequential damages, so the above limitation or exclusion may not apply to you. This warranty gives you specific legal rights and you may also have
other rights which vary from province to province/state to state. This warranty applies only to equipment purchased and installed in domestic residential applications in Canada or the
U.S.A. This warranty does NOT apply to commercial/industrial installations.
ENVIROGARD PRODUCTS LIMITED
446 Major Mackenzie Dr. E., Unit #6, Richmond Hill ON L4C 1J2 Canada
P.O. Box 64, Richmond Hill ON L4C 4X9 Canada
© COPYRIGHT * ENVIROGARD PRODUCTS LIMITED 2010 * ALL RIGHTS RESERVED
BH010/BH020 E Jan/10
pg 2.
Point of entry component tested and certified by CSA International to standard B483.1 and NSF/ANSI Standard 61 for
materials and structural integrity requirements only.
Head
Sump
