23
Flush mount installation: Fig. 4
•
Place the flush mount cup (
L
) on the installation place. Scribe and cut-out mounting hole.
•
Place tweeter (
J
) on ground plate (
U
), pull cables through the appropriate holes and put flush
mount ring (
L
) over the tweeter and fix it by twisting.
•
Place complete tweeter in cut-out and fix it with ring (
M
) from the backside.
•
The tweeter can be moved in all directions now.
•
Connect the tweeter-cable with the crossover. The cable with the red marking is “+”
Fig. 4:
Flush mount installation
Angle mount installation: Fig. 5
•
Put angle mount cup (
S
) on desired installation place. Scribe the mounting holes and cable
feedthrough and drill them.
•
Fix angle mount (
S
) with the provided screws.
•
Twist the intermediate ring on the tweeter and pull it down to remove it.
•
Insert tweeter (
J
) into the angle mount cup (
S
) and push the cables through the cable
feedthrough
•
Fix the tweeter (
J
) into the angle mount by twisting until it snap in.
Fig. 5
: Angle mount installation
Attention:
Use the provided assembly-kit for tweeter installation only!
