Final Adjustments
Slide door opening ring onto pin.
Pull door open using pole and hook.
Insert hook into eyelet at bottom of last tread (Figure 7)
and pull down slowly until it can be reached by hand. Pull
remainder of way until fully open.
Figure 7
Determine the correct number of steps required for your floor-to-ceiling height (See Table A on page 4).
If no additional steps are needed, skip this section.
1. With stair fully extended to floor, detach bottom step by removing the four bolts, washers and sleeves.
Figure 8. This tread will be added back at the end.
2.
Attach step by reinserting sleeves, washers and bolts. Figure 9. (Additional hardware is provided)
3.
Add back bottom step. Wheels should be in the back.
These wheels do not touch floor when stair is
fully extended. They are only to protect door when the stair is folded.
Adding Additional Step(s)
Page 6
October 2014
