4” ............20”
6” ............16”
8” ............12”
Bed Height Adjustment
Bed height is adjusted by lifting and lowering the bed press. Use label ruler
behind pin indicator (top of pin) located on both sides of the machine to
determine bed height(See below).
To adjust bed height, release the lock handles. Raising the bed is done by two
people lifting the deck by hand, or by slowly driving forward with the 3-point
hitch in the down position; the soil will lift the bed press. To lower the bed,
slowly lift 3-Point hitch with the tractor to the desired height and lock the
handles.
If your bed is not firm and has shallow spots in the center, add weight on the
bed press, adjust the top link, and/or install the optional center of bed fillers.
Lock Handle Adjustment
Important:
When bed height is adjusted, bed width (Page 7)
and trench openers (Page 10) need to be adjusted accordingly.
3 Ft. Plastic
Bed Height Bed Width
4 Ft. Plastic
Bed Height Bed Width
4” ...........30”
6” ...........26”
8” ...........22”
5 Ft. Plastic
Bed Height Bed Width
4” ...........40”
6” ...........36”
8” ...........32”
6
Bed Height Indicator
Bed height and bed width can be adjusted between the above chart indications.
