7
Bed Height Adjustment
Bed height is adjusted by lifting and lowering the bed press. Re-
move the bolt and nut shown below (on each side of the machine).
Raising the bed is done by two people lifting the deck by hand, or
by slowly driving forward with the 3-point hitch in down position;
the soil will lift the bed press. To lower the bed, slowly lift 3-point
hitch with the tractor to the desired height. Place the bolt and nut as
before.
Bed Height Adjustment
(Move up for higher bed; down for lower .)
Top Hole ..............3” Bed
Bottom Hole ........5” Bed
