5
STEP 5
See Operating Manuel for Adjustment
A
A
BB
CC
Drip Tape:
Remove plate with locking clamp
(A)
.
Slide drip roll onto
rod, press plate
(A)
tight against roll and tighten tee-handle on clamp.
Feed drip tape through swing arm guide and stationary guide
(B)
(See sketch) then into down pipe
(C)
.
Note;
Turn drip emitters up toward plastic for less clogging, and
make sure drip roll is compressed firmly between plates, for positive
braking effect.
Drip Tape
Guides /
Rollers
Installing Drip Tape Roll
