Rain Bird WS-PRO2, Installation, Operation, Maintenance, And Troubleshooting Manual, Page: 12 / 113

Conduit and associated tools (as required)
Felt-tipped marking pen
Claw hammer
Pipe wrench, 305 mm (12 in)
Handheld drill/driver with 10 mm (3/8 inch) hex driver bit
Drill with 6 mm (7/32 in) drill bit
4.2 Supplies for power and communications
options
AC Power
Wire, conduit, and junction boxes as needed ( FIGURE 4-1 (p. 8)).
FIGURE 4-1. WS-PRO2 pole installation with currently-available AC power option
NOTE:
User supplies valve box at base of station and weatherproof enclosure for transformer
(
FIGURE 4-1 (p. 8)).
Section 4. QuickStart 8