background image

8

Watering Schedule

Create customized irrigation schedules to run 

automatically at specific times, durations and 

intervals.

These schedules will stay in sync with the schedules 

created in the app. If changes are made in the timer, 

they will be updated to the app the next time it is 

opened. Once changes are made in the app and 

saved, they will be shown at the timer screen.

"

"

Press the 

SCHEDULE

 button.

Select Zone

Zones are designated areas (for example, “Rose 

Garden”) that you define as locations for watering.

"

"

Press 

+

 or 

 to select the desired Zone 

Number; then press 

NEXT

.

Set Watering Run Times

Watering Run Times are durations (for example, 

20 minutes) set for watering.

 NOTE:

 Run Times can be set between 1 to 199 

minutes.

"

"

Press 

+

 or 

 to set the desired Run Time (MIN); 

then press 

NEXT

.

Set Watering Start Times

Watering Start Times are times of day at which 

watering is set to begin.

 NOTE:

 A total of up to six Start Times (1-6) are 

available for each Zone.

"

"

Press 

+

 or 

 to set the 1st Start Time (ensuring 

that AM/PM setting is correct); then press 

NEXT

.

 NOTE:

 Start Time adjustments are set in 10 

minute increments.

 REPEAT

 as desired to set additional Start Times 

for that Zone.

 NOTE:

 Pressing 

NEXT

 when 

-:-

 (OFF) is 

blinking on the display will advance to Step 4.

 NOTE:

 If multiple zones have the same or over-

lapping watering times, the Timer will water the 

zones in sequence (multiple zones will not run 

at the same time).

Set Watering Start Days

Watering Start Days are the calendar days or 

intervals (for example, Monday, Wednesday and 

Friday) on which watering is allowed.

"

"

Press 

+

 or 

 to select one of four available 

Watering Start Day options:

a. 

Custom Days -

 

To schedule watering to occur 

on selected days of the week, 

go to 4a

.

b. 

Odd Days -

 To schedule watering to occur on all 

odd calendar days (1,3,5...29 etc.), 

go to 4b

.

c. 

Even Days -

 To schedule watering to occur on 

all even calendar days (2,4,6...30 etc.), 

go to 4c.

d. 

Cyclic Days -

 To schedule watering to occur at 

intervals (every 2 days, or 3 days, etc.), 

go to 4d

.

1

2

MIN

RUN 

TIME

1

2

MIN

Zone

1

2

MIN

START 

TIME

Summary of Contents for ST8-WiFi




















Reviews: