Rain Bird RMX-1T, Manual

Page: 18 / 20

Page 18
RMX-1T Keypad Transmitter
STAR T
PR O G
EN D
SES SIO N
SET
STA#
1 /A 2 /B 3 /C
4 /D 5 /E 6 /F
7 /G 8 /H 9 /J
C LEA R O /TEST STO P
STAR T
PR O G
EN D
SES SIO N
SET
STA#
1 /A 2 /B 3 /C
4 /D 5 /E 6 /F
7 /G 8 /H 9 /J
C LEA R O /TEST STO P
SET
TIM E
SET
PR O G
O N
AD V
➊
➋
Clearing Transmitter Memory
The transmitter retains the access code until you clear
its memory, even if several days go by between uses.
Before entering the access code for a second
receiver, you must clear the transmitter’s memory.
Press the CLEAR (
➊
) and END SESSION (
➋
) buttons to
clear the transmitter’s memory.
If the receiver is not responding to commands, the
problem could be in the transmitter’s memory. To
check, clear the transmitter’s memory, re-enter the
access code, and repeat the command.
Sensor Override
If the controller has a sensor connected to its internal
sensor terminals, commands from the transmitter will
override the sensor for 30 minutes. This allows you to
control the system remotely even if the sensor has the
system shut off.
RMX-1Tsande.p65 3/7/00, 10:14 AM 18