ISM Installation, Programming & Operation Guide
Page 23
Set Program Watering Start Time(s)
4 to set up to four separate watering start
times for each program, if needed.
NOTE:
If you selected one of the pre-
programmed schedules, you will see
the default watering start time(s) for
that schedule.
The watering start time for your program is
the time that the first programmed station
begins to run. Up to 4 watering start times
may be entered per program. Each
subsequent station will then run in sequence.
There is a 2-second delay between the
activation of stations.
1. Turn the Programming Dial to
SET
WATERING START TIME.
2. The program letter (A, B or C), the number
“1” (indicating the earliest start time), and
a row of four dashes “--.--” appear in the
display.
3. Press the
(+)
or
(-)
buttons to set the
program start time. If you want all the
stations on the program to run only once
each watering day, enter only one start
time for the program.
4. To enter another watering start time, press
Enter.
The next watering start time number
(2-, 3 or 4) and a row of four dashes
appear in the display. Repeat steps 3 and