14
IQ Network Communication Cartridge
Installation
ENG
Install an External Antenna for LXMM
If the LXMM Metal Case is used along with the a IQ4G
cartridge, then an external antenna must be installed in
place of the internal antenna provided. These external
antennas are not included with the NCC and must be
purchased separately (part number IQEXTANTGP).
a
Using a power drill and 5/8” (16 mm) drill bit, drill
a hole through the “dimple” on the top right of the
LXMM metal case.
C
CAUTION
Always wear eye protection when using tools or power
equipment.
a
b
Using a screwdriver or other pointed tool; center the
point of tool on the “dimple” in the center of the knock-
out, then punch through and remove the antenna
knock-out hole located on the top right of the ESP-LX
controller plastic case.
b
638085-02_20JA20_IQ-NCC user manual.indd 14
638085-02_20JA20_IQ-NCC user manual.indd 14
1/20/2020 11:20:31 AM
1/20/2020 11:20:31 AM
