B
CYC
CYC
VII - Manual cycle start.
A cycle consists of the sequential operation of all stations assigned to the same program.
Use A/B key to select the program.
Then press the +/ON key to start the cycle. The sprinkler stream will blink. The 1rst station number in the
program appears and the remaining water time for the stations is counted down. The rest of the stations
will appear in sequence. If the Water Budget function is used, the % icon will appear next to "A" or"B". The
increased or decreased watering time will also appear in the display.
To stop watering before the cycle is completed, press the -/OFF key. the controller will revert to the time of
day display.
Note : if the controller is in the OFF mode (a non-blinking cross on the sprinkler), no manual or automatic
watering will occur. See step VIII
VIII - System ON/Shutdown.
The default mode is "ON" wich allows programmed watering to take place.
You can prevent watering (rainy weather shutdown) without changing the scheduled watering programs
Call up the display with the blinking cross on the sprinklers. To prevent watering, press the -/OFF. The
cross stops blinking. If you move through the menu by pressing
key, you will see that the non-
blinking cross appears in all the displays except one.
No watering, either automatic or manual, will take place. To return to the watering mode, press the
key until the blinking cross display appears.
Now press the +/ON key. The cross disappers.
ACTION AFTER POWER OUTAGE
If the LED is out, the LCD is blank. There is no 230 V power input. No irrigation will take place. However, the Image has
an electronic memory safeguard component that will maintain the irrigation programs for at least 24 hours. If the power
outage lasts longer, the programs are lost. A default program will cause each station to revert to program "A" and to
water for 10 minutes a day beginning 8 hours after power is restored. It is then necessary to reprogram the controller.
CERTIFICATE OF CONFORMITY TO EUROPEAN DIRECTIVES
I declare that the IMAGE device, an irrigation controller, conforms to the 72/23/CEE European Directives for electrical
safety and to 89/336/CEE and 93/31/CEE concerning electromagnetic compatibility.
The applicable standards in accordance with the technical file are :
EN 60065 for electrical safety.
EN 55022 class B for interference.
CEI 801-2 class 2, CEI 801-3 class 3, CEI 801-4 level 3 and CEI 801-5 class 4 for interference resistance.
The IMAGE type device is powered by 230 V~, 50 Hz, single phase.
Aix en Provence, 10/06/96
General Manager
RAIN BIRD EUROPE