2
Normal Operation
Auto
Watering occurs automatically according to
programmed irrigation schedules.
Press the
AUTO
key to resume normal operation
whenever programming is completed and to
monitor active watering.
l
b
NOTE:
Unless the
OFF
key is pressed, the
controller will revert to AUTO mode by default
after 10 minutes, if no programming activity
(key presses) occurs during that time.
In Auto Mode:
The display shows the current time, date and day of
the week:
M
D Y Y Y Y
PM
During Watering:
The display shows a blinking sprinkler symbol,
the active Zone number and watering Run Time
remaining for that Zone.
MIN
Zone
Run
Time
Press
+
or
–
to adjust watering Run Time
remaining for the active Zone as desired.
Press
NEXT
to immediately cancel watering for
the active Zone and advance to the next Zone in
the irrigation queue.
Off
Cancel all active watering immediately and
disable automatic irrigation.
Press the
OFF
key to immediately cancel all
active watering.
Programmed irrigation schedules remain stored in
memory even when the controller is turned off or if
power is lost.
l
b
NOTE:
Press the
AUTO
key to resume normal
operation. Automatic irrigation will NOT occur if
the controller remains in OFF mode.
Basic Programming
Date/Time
Set the current calendar Date and Time of day.
Press the
DATE/TIME
key.
Press
+
or
–
to set the month (M); then press
NEXT
to select and set the day (D), then year
(YYYY).
M
D Y Y Y Y
AM
DATE