28
28
Optional Features
ESP-Me Advanced User Manual
Optional Features
Connect Optional Accessory
d
b
NOTE:
Use only Rain Bird approved devices with
5 pin accessory port. Unapproved devices may
damage controller and void warranty.
1.
The front panel provides a port for the use of external
devices, such as the Rain Bird LIMR Remote.
1.
Remote Programming
Program the front panel remotely on battery power.
The front panel can be removed from the controller and
programmed remotely using a 9 volt battery for power.
Settings can be programmed for all 22 stations regardless
of which station modules are installed in the controller.
d
b
NOTE:
This is useful if a contractor wants to program
the controller prior to installation on site.
1.
Remove the front panel (refer to Remove Front Panel in
the Installation section).
2.
Install a 9V battery in the battery compartment.
2.
1.
3.
Program the controller.
d
b
NOTE:
Program information is stored in nonvolatile
memory so it is never lost if the front panel loses
power.
4.
Replace the front panel (refer to Complete Installation in
the Installation section).
d
b
NOTE:
After the front panel is re-installed, any
station that does not have a corresponding Station
Module installed will function as though the run
time is zero.
