23
4.
If you want to operate more than one pro-
gram, press PGM to select another program
and press MAN START/ADV again. The sec-
ond program runs when the first is complete.
You can stack all four programs in this way.
Operating a station or stations manually
You can initiate one-time operation of a single
station or a combination of stations. If you run
more than one station, they will run in the order
in which they were selected. To operate one sta-
tion or multiple stations:
1.
Rotate the dial to MANUAL WATER. The
display shows the program, the station num-
ber, and any watering time remaining on that
station.
2.
Press PGM until the program you want is
displayed.
3.
Use the arrow keys to select the station you
want to operate.
4.
Press MAN START/ADV to start the selected
station.
5.
If you want to operate more than one station,
repeat steps 2 through 4.
6.
Return the dial to AUTO. The controller re-
turns to the time of day display and the sta-
tions operate in the sequence they were se-
lected. After the stations are finished water-
ing, the controller returns to the automatic
mode.
Note:
When you operate a station manually, you
cannot change the amount of time the station will
water. You must water for the amount of time al-
ready programmed.
PGM
A
WATER TIME REMAINING
STATION