Rain Bird ESP-7ME3 Advanced User'S Manual Download Page 13

ESP-ME3 Controller

13

EN

Seasonal Adjust

Increase or decrease program run times by a selected 
percentage (5% to 200%).

As an example: 

If the Seasonal Adjust is set to 100% 

and the station Run Time is programmed for 10 min-
utes, the station will run for 10 minutes. If the Seasonal 
Adjust is set to 50%, the station will run for 5 minutes.

Turn the dial to 

Seasonal Adjust

.

Press   or   to increase or decrease 

Seasonal 

Adjust

 for all Programs.

To adjust an individual Program, press 

Program 

Select

 to choose the desired Program (if 

necessary). Press   or   to increase or decrease 

Seasonal Adjust

 for all Programs.

Delay Watering

Suspend watering for up to 14 days.

Turn the dial to 

AUTO

.

Press and Hold the   button to enter the 

Rain 

Delay

 screen.

Press   or   to set the 

DAYS REMAINING

. The 

NEXT

 watering day will update on the display to 

indicate when watering will resume.

To cancel a Rain Delay, set the 

DAYS REMAINING

 

back to 0.

 

B

NOTE:

 When the delay expires, automatic irriga-

tion resumes as scheduled.

Permanent Days Off

Prevent watering on selected days of the week (for 
Odd, Even or Cyclic programming only).

Turn the dial to 

Water Days

Press 

Program Select

 to choose the desired 

Program (if necessary).

Press and hold 

Program Select

, then press   to 

set the selected (blinking) day as a 

Permanent 

Day Off

 or press     to leave the day 

ON

.

Summary of Contents for ESP-7ME3




















Reviews: