Page 7 of 20
railfanmodels.com
6.
Place the masking tools into the sides opposite
each other. Use the picture as a guide to tape
the masks into place. Use a light adhesion tape
designed for masking paint.
7.
The tape on the top deck should be
placed where the taper of the deck
plating meets the thin section of
plating.
8.
On the lower deck portion of the
masks, place a pencil mark 3/8 inches
from the end of the mask. The tape
on the bottom deck should be
placed on the marks of the mask.
9.
Paint the exposed area gloss white. There is a decal placed in this area so the gloss finish just
helps here.
10.
Remove the masking shortly after spraying and is dry to the touch. Don’t let set overnight
though.
11.
Mask the other side and paint. Remove the masking as before.
12.
Let the paint cure.
