23
USRA 2-8-8-2 Steam Engine Operating Instructions
Programming FYS Operation -
Reset Feature 28-(5 Clanks, 3 Clinks)
Reset Feature 28 allows you to turn the operation of the FYS sequence on
or off. When OFF, the FYS will not activate. To use, cycle to Reset 28 and
press the Horn/Whistle button. The engine will play a series of bells. This
indicates the current setting.
Each time the Whistle
button is pressed,
Proto-Sound® will cycle to
the next available setting
and provide the appropriate
bell indicator. The settings
for Reset 28 are 1 Bell =
ON, 2 Bells = OFF. When
the desired setting is
reached, lock the changes
by interrupting the throttle and cycling the engine into forward.
Activating Remote Lock-Out Control
-
Reset Feature 40-(8 Clanks,
0 Clinks)
Reset Feature 40 allows you to enable the Reverse Unit Lockout feature of
Proto-Sound®. When enabled, you are able to lock the engine to run in only one of
the directional states (Forward, Neutral or Reverse) whenever power is applied. The
most common use for locking
out an engine is in the use of
power blocks on a layout. To
use, cycle to Reset 40 and
press the Whistle button. The
engine will play a series of
bells. This indicates the
current setting. Each time the
Whistle button is pressed,
Proto-Sound® will cycle to the
next available setting and
provide the appropriate bell indicator. The settings for Reset 40 are 1 Bell = OFF, 2
Bells = ON. When the desired setting is reached, lock the changes by interrupting
the throttle and cycling the engine into forward.
