10
RailKing SD-90 MAC Operating Manual
release the bell button. (
Note:
because the air release sound is hard to
hear, we recommend that you count out a full three seconds before
releasing the bell button
.) The bell will continue to chime, so if you want to
turn off the bell ringing, simply press and release the bell button a second
time. If you were in neutral when you triggered the brake feature, interrupt
the transformer throttle to enter either forward or reverse to allow the
engine to begin running. (
Note:
the feature will only be activated in the
first direction state you enter after triggering the feature from the neutral
position. You cannot interrupt the power twice to enter another direction
state and still have the brake feature active
.) Once your engine begins
running, you can trigger the sounds to begin playing whenever you enter
neutral.
Option 2
If you do not have a separate bell button on your layout, you can
still activate the feature with your transformer whistle button. To activate
the feature turn on the transformer throttle and get your engine into the
neutral position (not RESET). Once in neutral, set the transformer throttle
at 8 volts or less and press and hold the whistle button for at least three
seconds. You will hear the bell chiming turn on and if you listen carefully
you should hear an air release sound after three seconds have passed at
which time you can release the whistle button. (
Note:
because the air
release sound is hard to hear, we recommend that you count out a full three
seconds before releasing the whistle button.
) The bell will continue to
chime, so if you want to turn off the bell ringing, simply press and release
the bell button a second
time. Interrupt the
transformer throttle to enter
either forward or reverse to
allow the engine to begin
running. (
Note:
the
feature will only be activate
in the first direction state
you enter after triggering the feature from the neutral position. You cannot
interrupt the power twice to enter another direction state and still have the
feature active.
) Once your engine begins running, you can trigger the
sounds to begin by entering neutral.
Ding,
Ding
Psshhee
Put Engine In Neutral
At Low Power
Press & Hold
The Whistle Button
For 3 Seconds
Listen For The
Start Of The Bell Sound
Listen For The
Air Release Sound
After 3 Seconds
H
