10
RailKing 2-6-0 Train Set Operating Manual
RAILKING
Special Reverse Unit Options
Locking Out The Reverse Unit Into One Full-Time
Direction
Your electronic reverse unit locomotive may be locked out into one of
three positions; forward, neutral or reverse. Locking the engine into
one of these three positions prevents the locomotive from cycling
through the reverse unit
phases and is useful for
operators employing block
signal operations on their
layout. Once locked into
a position, turning the
throttle off and then on
again will not allow the
engine to enter the next
reverse unit phase and
instead keeps the engine
in the current locked out
phase.
To lock out the engine into
one of the three positions, simply enter that position using the
transformer throttle or direction button. Once in the desired direction,
remove the locomotive from the track and slide the ON/OFF switch
located on the bottom of the chassis (See Figure 13) to the OFF
position. This locks the engine into the desired direction. Sliding the
switch back to the ON position resets the reverse unit into its normal
reverse unit cycling phases.
Reverse Unit Lock-Out Switch
Figure 13: Electronic Reverse Unit Lock-out Switch location
(bottom chassis view).
