Basic Operation
After making sure everything is properly assembled, aim the Remote at the Receiver and
press the SU/SD Button on the Remote (NOTE: Because this is an infrared line-of-
sight remote, you must aim the remote at the receiver in order to send signals to the
track.). Once pressed, the Engine start up sound will begin as well as the lights and
smoke unit will turn on. Now press the + end of the Remote's Throttle Control and
the train will start to move forward. Each time you press the + end of the Throttle
Control the train will move faster and faster. Please see the Operating Buttons Using the
Handheld Remote for more information on using the Remote to operate the train.
PFA
Activates Passenger/Freight
Sounds
SND
Plays accent sounds
SU/SD
Start-Up/Shut-Down
Activates or Deactivates
sound,smoke,lights
BELL
Rings Bell
WHISTLE/HORN
Blows Whistle/Horn
CPLR
Fires front & rear couplers
VOL
Volume
DIR
Direction
-
Throttle Down
+
Throttle Up
NOTE: You cannot use this Remote and Receiver with pre-1997 versions of Proto-Sound™ or
with Proto-One™, Proto-Plus™, Proto-Deluxe II™ engines, whatever the date.
™
RailKing® ES44AC Diesel Ready-To-Run Set w/Proto-Sound® 3.0
8
