manualshive.com logo in svg

Rail King RAILKING E-8 AA, Operating Manual

The Rail King RAILKING E-8 AA comes with a comprehensive Operator's manual equipped with all the necessary instructions to maximize your experience. Easily accessible for download, this manual is available for free at manualshive.com. Get in-depth knowledge of your product's functionalities and unleash its potential with the help of this user-friendly manual.

Share
Download
background image

26

RailKing E-8 AA Operating Manual

NOTE

: 

 When locking the engine in the Forward or Reverse positions, the

whistle button will blow the horn.  But when locking the engine into the
NEUTRAL position, the whistle button may turn on or off sounds of the bell, 
coupler arming or coupler firing depending on the transformer throttle
voltage settings prior to the user’s attempt to lock out the engine.
Remember, the horn doesn't blow in NEUTRAL (unless you programmed it
to do so using Feature 25.  See page 20 for details), only the bell rings or
the coupler operates in NEUTRAL.  While it doesn't make any difference on 
how the lockout function operates,  you may hear one of the three different
NEUTRAL-activated sounds.

  To unlock the engine from the NEUTRAL position, follow the process to
unlock the engine in the Forward or Reverse directions above.

Summary of Contents for RAILKING E-8 AA











































Reviews:

No comments

Related manuals for RAILKING E-8 AA

Brands by name

Popular brands

Load more brands