Notes:
Always approach a desired station stop location while running in Forward.
Learn mode counts distance traveled, not actual physical locations. However,
unlike an automobile's odometer, Proto-Sound 2.0 Learn Mode does erase
distance when traveling in reverse. If you operate your car past the desired stop
location, you may back it up to the desired stop location, however you must put
the car into forward and then neutral again before saving the stop name and
location into memory.
3. Auto Mode
When you have finished programming your stations in Learn the car will be in
Manual Mode. Running in Forward, stop the car at the location of the first
programmed station by pressing the Direction button. Press Bell Horn Horn to
put the train into Auto Mode. Press the Direction button again to begin operation
in Auto Mode. Because Auto Mode operation begins at the first stop, the next stop
announced will be the second stop.
Notes:
The engine will always power up in Manual Mode.
Function Learn Mode
Button Code:
To Enter Learn Mode
To Stop at Each Station
To Scroll through the Station Names
To Save Station
1 Horn, 4 Bells
Direction
Bell (hold to scroll and release as soon
as you hear the desired station name)
Horn (hold for "Saved" response)
Function Auto Mode
Button Code:
To Enter Auto Mode from
Manual Mode
To Begin Programmed Run
1 Bell, 2 Horn at the location of the
first programmed station stop
Direction
Function Manual Mode
Button Code:
To Enter Manual Mode
from Auto Mode
1 Bell, 2 Whistles
RailKing R142 5-Car Subway Set
10
