17
R-17 Subway Set with Proto-Sound® 2.0
Headlights
To replace the headlights and other
end-of-car lights in the powered unit:
1. Remove the shell as described in
the “Lubrication and Greasing”
section of this booklet.
2. Pull out the bulb shown in Figure 8
to replace the Number/Destination
Board bulb.
3. To replace the headlight bulbs,
remove the harness witht the blue 2
pin connector shown in Figure 9.
4. To replace the top marker lights,
remove the harness with the yellow 2
pin connector shown in Figure 9. 5.
To replace the marker lights below the
headlight, remove the harness with the
green 2 pin connector shown in Figure
9.
Replacement bulbs and wire ties are
available directly from the M.T.H.
Parts Department (order online:
www.mth-railking.com, e-mail:
[email protected]; mail: 7020
Columbia Gateway Drive, Columbia
MD 21046-1532, FAX: 410-381-
6122).
Gently Pull Bulbs
Away From Socket
To Remov
e
Unplug Marker Light Wires
From Socket To Remove
Figure 8
Figure 9
