Checking the Battery
You may find, if your locomotive was built several months before you set it up,
that the rechargeable battery has run down and needs to be charged before
operating. If you notice that the sounds are garbled, test and charge the engine as
described in the "Self-Charging Battery Back-Up" on page 16.
Coupling the Engine and Cars
Our couplers are designed for realistic operation. Place the engine and cars on
the track and couple them together. If the coupler is already closed, press down
on the small finger that extends from under the right side of the coupler to open
the coupler knuckle and allow the couplers to interlock as shown in below.
STEP
2
2
Position
armiture
for proper
operation
Incorrect
Position
STEP
1
1
Place the engine and cars
on the track.
Open couplers by pressing
down on plunger.
Push cars together
to couple.
STEP
3
3
RailKing F-3 Freight/Passenger Set with Proto-Sound® 2.0
5
Figure 1
